|
楼主 |
发表于 2007-7-1 11:18:17
|
显示全部楼层
说明是翻译M060的,过程步骤是一样的
一.start pro/e setup
运行 pro/e 的安装程序,记下你的HOSTID即你的网卡地址
二.open ptc_licfile.dat with your fav txt-editor
用你喜欢的文本编辑器打开ptc_licfile.dat文件
三.replace every occurance of <HOSTID> with the one shown in the bottom left corner of the Pro/e setup
(its your mac-id, format: xx-xx-xx-xx-xx)
用显示于Pro/e安装窗口左下角的(它是你的网卡地址,格式是xx-xx-xx-xx-xx)替换每一个<HOSTID>
四.install pro/e - pro/m - pro/ds, i don't care which one or in which order
安装 pro/e - pro/m - pro/ds,
.on license-config screen select "nodelocked license" and point to edited ptc_licfile.dat
在许可证配置窗口选择“节点锁定的许可”并指向编辑后的ptc_licfile.dat文件
.blalala install
五.Crack
①next for pro/engineer:
对于pro/engineer:
(if u didn't install the complete package, u get "missing file" errors, accept or bleed)
如果你没有安装全部的组件,你会看到“丢失文件”错误的提示。不用理它
.run ptc.pro engineer.wildfire.3.0.m060-patch.exe, point to <installdir>\i486_nt\obj folder
在pro/engineer安装文件夹(proeWildfire 3.0\i486_nt\obj)里运行ptc.pro engineer.wildfire.3.0.m060- patch.exe进行Crack
② .edit <pro/e installdir>\bin\proev.bat
编辑proeWildfire 3.0\bin里的proev.bat文件(一般用不到)
change "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;% CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%" in
"%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;% CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0"
(add PTC_KEY=0)
③ pro/mechanica:
对于pro/mechanica:
.run ptc.pro mechanica.wildfire.3.0.m060-patch.exe
.point to <pro/m installdir>\i486_nt\bin;
<pro/m installdir>\i486_nt\obj
<pro/m installdir>\i486_nt\ptc
(in this order, after every "missing file" error)
在pro/mechanica安装文件夹(mechWildfire 3.0\i486_nt\bin;obj;ptc)里运行ptc.pro mechanica.wildfire.3.0.m060-patch.exe进行Crack
④ pro/distributed services:
对于distributed services
.run ptc.distributed.services.m060-patch.exe and point to <pro/ds installdir>\i486_nt\obj
在distributed services的安装文件夹里\i486_nt\obj运行ptc.distributed.services.m060-patch.exe
Have Fun Team SHooTERS !!!!
|
|