找回密码
 注册
查看: 91753|回复: 26

[原创教程] 电话线的做法教程

    [复制链接]
发表于 2007-5-22 13:32:24 | 显示全部楼层 |阅读模式
电话线的做法

教程是英文的,如果看不懂,可以联系我
coil_st3.jpg
cord.jpg

评分

1

查看全部评分

 楼主| 发表于 2007-5-22 13:34:35 | 显示全部楼层
HOW TO CREATE
A COILED CORD by M. Frazao  

   
STUDIO
Modeling
[04.12.00] Updated for Studio 9.5

In this lesson you will learn how to model a coiled cord by sweeping a generation curve around a rail curve using the Monorail tool.

You will also learn how to use a Construction Plane to build a generation curve planar to the angle of which the provided rail curve was created in. This will allow the generation curve to sweep around the rail curve in a natural manner.
 楼主| 发表于 2007-5-22 13:38:39 | 显示全部楼层
STEP ONEDownload the file phone.rar and open it in Studio.

[ 本帖最后由 adrian 于 2007-5-22 13:39 编辑 ]

phone.rar

300.41 KB, 下载次数: 10366, 下载积分: 华币 -1

 楼主| 发表于 2007-5-22 13:40:18 | 显示全部楼层
STEP TWOIn the perspective window, hold down the Shift and Alt keys to bring up the Viewing panel.
Click on the bookmark swatch to view the preset bookmarks.
Select the preset bookmark named close_up
The camera view takes you up-close to the starting point of the rail curve.
coil1.jpg
 楼主| 发表于 2007-5-22 13:40:58 | 显示全部楼层
STEP THREEIn the next few steps you will position a construction plane to the rail curve start point.
You will also constrain the construction plane to match the angle of which the rail curve meets the phone receiver
Select Construction -> Plane.
file:///F:/alias/AutoPlay/alias%20guide%20cd1/电话线的做法/index.files/black_line.gif


STEP FOUR
In the Top view window, hold down the Ctrl key to activate the magnet function.
Click near the rail curves' start point.
The construction plane jack appears.

[ 本帖最后由 adrian 于 2007-5-22 13:42 编辑 ]
coil_st5.jpg
 楼主| 发表于 2007-5-22 13:41:36 | 显示全部楼层
STEP FIVEThe construction plane jack is color coded red, green and blue, representing the colors of X,Y and Z world space.
The orientation of the cp jack should be planar to the angle of which the rail curve meets the telephone body.
Click on the red dotted arc manipulator, close to the cpY constrained manipulator, represented by a green sphere, to activate the jacks' X rotation and Y constraint
coil_st6.jpg
 楼主| 发表于 2007-5-22 13:43:03 | 显示全部楼层
STEP SIXIn the right view window (for viewing purposes) hold down the Ctrl and Alt keys to activate the curve snap function.
Click somewhere in-between the starting point and the second control vertex (U) on the rail curve.
Notice how the construction plane jack reorients its' position so that its' Y axis is constrained to the angle of which the rail curve meets the telephone body.
coil_st7.jpg
 楼主| 发表于 2007-5-22 13:44:04 | 显示全部楼层
STEP SEVENClick on the Accept Points button and following, select the Set Construction Plane button.
Notice the the models' orientation in the orthographic windows has changed to match the construction planes' X,Y and Z axis.
The perspective view is unchanged but the working grid has reoriented itself with its origin at the starting point of the rail curve.
file:///F:/alias/AutoPlay/alias%20guide%20cd1/电话线的做法/index.files/black_line.gif

STEP SEVEN
Click on the Accept Points button and following, select the Set Construction Plane button.
Notice the the models' orientation in the orthographic windows has changed to match the construction planes' X,Y and Z axis.
The perspective view is unchanged but the working grid has reoriented itself with its origin at the starting point of the rail curve.
file:///F:/alias/AutoPlay/alias%20guide%20cd1/电话线的做法/index.files/black_line.gif

STEP NINE
Select Xform -> Nonpscale.
Type in a value of 0.075, 0.15, 0.0.
coil_st9.jpg
 楼主| 发表于 2007-5-22 13:44:35 | 显示全部楼层
STEP TENSelect Xform -> Move.
Type in a value of 0.25, 0.0, 0.0.
coil_st11.jpg
 楼主| 发表于 2007-5-22 13:45:28 | 显示全部楼层
STEP ELEVENIn the perspective window hold down the Shift and Alt keys to bring up the viewing panel.
Select the preset bookmark named rail_crv.
In this view, Pick and Delete the construction plane.

STEP TWELVE
In the next few steps you will use the Monorail tool to sweep the generation curve around the provided rail curve.
Select Surfaces -> Swept surfaces -> Rail surface -> Options and set the following;
    Rail and Generation Curves to 1
    Rebuild Gen.1 and Rebuild rail 1 to ON
    Sweep Pivot from Closest to OFF CURVE
    Rotate Xform value to 36000.
This will set the degree of rotation for the generation curve to sweep around the rail curve.
Note: Keep the Monorail options window open for the next few steps.

STEP THIRTEEN
The prompt asks you to select the generation curve.
In the viewing panel go back to the close_up camera view and Pick the generation curve to make it active.

STEP FOURTEEN
The prompt then asks you to set the sweep pivot for the generation curve.
Hold down the Ctrl key to activate the magnet snap function and click near the rail curves' start point.
Click on the Go button.
coil_st15.jpg
您需要登录后才可以回帖 登录 | 注册

本版积分规则

本站无意传播任何侵权软件与信息,部分资源为网友搜集或发布,仅供学习和研究使用,请支持正版。站内所发布的资源,如有侵犯你的权益,请联系我们,本站将立即改正或删除。

QQ|Archiver|手机版|小黑屋|联系我们|中华设计论坛 ( 苏ICP备20023187号-1

GMT+8, 2024-11-27 05:04

Powered by Discuz! X3.5

© 2006-2024 Daliang Team.

快速回复 返回顶部 返回列表